Clean-sign light, Lean-sign – Sharp FP-N60CX Manuel d'utilisation

Page 11

Advertising
background image

ENGLISH

E-9

Pollen Mode Indicator
Light

Remote Control Receiver

MODE-ON / OFF button

See Page E-14

(Used to select operations or turn the unit off)

Sensor sensitivity select switch

The unit’s sensitivity to odor and dust detection can be ad-
justed. This setting is factory set to “NORMAL”, and it is rec-
ommended that you use the unit in this setting. Set the sen-
sitivity to “SENSITIVE” if the sensitivity seems too low de-
pending on the room condition.

Filter Reset Button

Odor Sensor

Detects odors such as tobacco smoke, pets, cosmetics, etc.

Sensor Cover
Dust Sensor

Detects dusts, smoke, pollen, house dust, etc. See Page E-18,E-20

Main Unit

Filter Frame

True HEPA Filter (white)

See Page E-19

(Dust Collection Filter with Anti-Bacterial Apatite Filter sheet covering its front surface)

Washable Active Carbon Filter (black)

(Deodorizing Filter)See Page E-16

Filter Separator

Pre-Filter

Front Panel

Hook

Remote Control

See Page E-15

CLEAN-SIGN LIGHT

The color changes according to the air condition.

Clean (Green)

Slightly Impure (Orange) Very Impure (Red)

ABOUT THE CLEAN-SIGN

• The sensors display a CLEAN-SIGN depending on relative changes

to the environment from the time the power plug is inserted into the
wall outlet and thereafter.

• When the air is extremely impure at the time the power plug is in-

serted, the CLEAN-SIGN LIGHT may light green since the impure
condition is the environment against which the sensors base the im-
purity rate on. In this case, operate the unit for a while in Clean Mode
first, then switch to the desired operation mode. See Page E-15

• To reset the base impurity rate on the CLEAN-SIGN remove and

insert the power plug.

• The CLEAN-SIGN LIGHT can be turned off using the “Display ON/

OFF” Button of the Remote Control. See Page E-15

*Before pressing the Filter Reset But-
ton, be sure that the unit is plugged in.
There is also a Filter Reset Button on
the remote control.
After cleaning and reinserting the
Washable Active Carbon Filter, press
the Filter Reset Button.

CLEAN-SIGN

CLEAN-SIGN

CLEAN-SIGN

MAX

h

POLLEN

HIGH

LEAN-SIGN

SENSOR

NORMAL

SENSITIVE

FILTER RESET

Advertising