Samsung AD68-00541C Manuel d'utilisation

Page 78

Advertising
background image

ENGLISH

Digital Still Camera mode

Mode appareil photo numériques

FRANÇAIS

Inserting Memory Stick

1. Turn the Power switch to OFF.
2. Insert tne Memory Stick into the Memory Stick

slot located on the camcorder,
in the direction of the arrow.

Removing the Memory Stick

1. Turn the Power switch to OFF.
2. Remove the Memory Stick by pushing the card

in and letting it spring out.

Do not attempt to pull the Memory Stick out
without first pushing it in.

Notes

If you turn the power switch to M.PLAY,
the last recorded image appears.
-

If there are no recorded images on the
Memory Stick, NO STORED IMAGE! and

will display on the screen.

Do not turn the power off while recording, loading, erasing or
formatting.

Please turn the power off before you insert or remove the
Memory Stick. You could lose data on the Memory Stick.

Do not allow metal substances to come in contact with the
terminals of the Memory Stick.

Do not bend, drop or apply strong shock to Memory Stick.

After pulling the card out from the camcorder, please keep the
Memory Stick in a soft case to prevent static shock.

The stored contents may be changed or lost as a result of
misuse, static electricity, electric noise or repair.
Save important images separately.

Samsung is not responsible for data loss due to misuse.

If the USB cable is connected to the camcorder,
the (DELETE), (S.SHOW), (FWD), (REV)
buttons are not available in M.PLAY mode.

Insertion et éjection du Memory Stick

Insertion du Memory Stick

1. Placez l’interrupteur d’alimentation sur OFF.
2. Insérez le Memory Stick dans son logement situé

sur le côté droit du caméscope selon le sens de
la flèche.

Retrait du Memory Stick

1. Placez l’interrupteur d’alimentation sur OFF.
2. Retirez le Memory Stick en poussant la carte vers

l’intérieur et en la laissant s’éjecter.

Ne tentez pas de retirer le Memory Stick sans
l’avoir préalablement poussé vers l’intérieur.

Remarques

Si vous placez l’interrupteur d’alimentation sur
M.PLAY, la dernière image enregistrée apparaît.
-

Si aucune image n'est enregistrée sur le
Memory Stick, NO STORED IMAGE! et
apparaissent à l’écran.

Ne coupez pas l'alimentation en cours
d'enregistrement, de chargement, d'effacement
ou de formatage.

Veillez à éteindre l'alimentation lorsque vous insérez ou retirez le
Memory Stick. Vous pourriez perdre des données présentes sur
le Memory Stick.

Evitez que des substances métalliques n'entrent en contact avec
les bornes du Memory Stick.

Ne pliez pas le Memory Stick, ne le laissez pas tomber ou ne lui
faites
pas subir de choc violent.

Après avoir retiré la carte du caméscope, rangez le Memory
Stick dans
un boîtier antistatique afin d'éviter une décharge statique.

Les données enregistrées peuvent être modifiées ou perdues en
raison d'une mauvaise utilisation, de l'électricité statique, de
parasites électriques ou de réparations. Enregistrez les images
importantes séparément.

Samsung ne saurait être tenu responsable des pertes de
données dues à une mauvaise utilisation.

Si le câble USB est relié au caméscope, les boutons

(DELETE),

(S.SHOW),

(FWD),

(REV) ne sont

pas utilisables en mode M.PLAY.

Inserting and removing the Memory Stick

78

Advertising