Pc operation, Continued), Rs-232c command table – Sharp PN-655U Manuel d'utilisation
Page 48: Power control/input mode selection, How to read the command table
46
E
PC Operation
(Continued)
Power control/Input mode selection
RS-232C command table
<How to read the command table>
Command:
Command field (See page 39.)
Direction:
W
When the “Parameter” is set in the parameter field (see page 39), the
command functions as described under “Control/Response Contents”.
R
The returned value indicated under “Reply” can be obtained by setting
“????”, “___?” or “???+” (repeater control) in the parameter field (see
page 39).
Parameter:
Parameter field (See page 39.)
Reply:
Response (Returned value)
* “Yes” indicates commands which can be used in power standby mode.
0
1
0
1
2
3
4
0
1
2
1
2
3
4
Yes
Yes
W
R
W
R
POWR
INPS
POWER CONTROL
INPUT MODE SELECTION
Control item
Command Direction
Parameter
Reply
Control/Response contents
*
Switches to standby mode.
Returns from standby mode.
Standby mode
Normal mode
Input signal waiting mode
Toggle change for input mode
PC digital RGB (DVI-D) (DIGITAL)
PC analog RGB (ANALOG)
Component (COMPONENT)
Video (VIDEO)
PC digital RGB (DVI-D) (DIGITAL)
PC analog RGB (ANALOG)
Component (COMPONENT)
Video (VIDEO)
*can be used in standby mode