Pc operation, Continued), Communication conditions – Sharp PN-655U Manuel d'utilisation

Page 40

Advertising
background image

38

E

PC Operation

(Continued)

2.

Daisy chain connection from a single PC...... Advanced operation

Connect with RS-232C straight cable between the PC COM port (RS-232C connector) and the
RS-232C input terminal on the rear of monitor.
Next, connect RS-232C straight cable to the first monitor’s RS-232C output terminal and to the
second monitor’s RS-232C input terminal. Connect in the same way to the third and subsequent
monitors. The number of connectable monitors varies depending on the length of the cable used and
the surrounding environment.

Communication conditions

Set the RS-232C communication settings on the PC to match the monitor’s communication settings.

RS-232C straight cable
(commercially available)

To COM port

RS-232C
input terminal

RS-232C
output terminal

RS-232C
input terminal

RS-232C
output terminal

(To the third monitor)

RS-232C

OUT

IN

RS-232C

OUT

IN

▼ First monitor

▼ PC

▼ Second monitor

Baud rate

9,600 bps

Data length

8 bits

Parity bit

None

Stop bit

1 bit

Flow control

None

Advertising