Sharp PN-655U - Manuel (Page 46)

44
E
<Response format in Advanced operation >
■ When a command has been executed correctly
• Response when no ID number has been set
A response is returned when execution of the
pertinent command is finished.
• Response when an ID number has been set
■ When a command has not been executed correctly*
• Response when no ID number has been set
• Response when an ID number has been set
* This is returned when there is no such command, or when the command cannot be used in the current state of
the monitor.
Example: When “ADJUSTMENT” is used (a command which is effective when the input mode is “ANALOG”),
while video is displayed (the input mode is “VIDEO”).
* If communication has not been established for reasons like a bad connection between the PC and the monitor,
nothing is returned, not even ERR.
* If no monitor has been assigned the designated ID number (e.g. if the command IDSL0002 is used, but no
monitor with ID number: 2 is found), no response is returned.
O K
Return code
(0D
H , 0A H )
O K SPC 0 0 1
ID number of responding monitor
Space (20 H ) Return code
(0D H , 0A H )
R R E
Return code
(0D H , 0A H )
R R E SPC 0 0 1
ID number
Space (20 H ) Return code
(0D H , 0A H )
PC Operation
(Continued)