Provided accessories, How to attach the lens cap, How to attach the shoulder strap – JVC GR-D390U Manuel d'utilisation

Page 12: Elet (੬ pg. 12)

Advertising
background image

GETTING STARTED

12

EN

MasterPage: Left

1 AC Adapter AP-V14U or AP-V18U
2 Battery Pack BN-VF707U
3 Audio/Video Cable (ø3.5 mini-plug to RCA

plug)

4 USB Cable
5 Core Filter (for USB cable, pg. 13 for

attachment)

6 CD-ROM
7 Remote Control Unit RM-V720U
8 Lithium Battery CR2025* (for remote control

unit)

9 Memory Card (Already inserted in the

camcorder)

! Shoulder Strap (see the right column for

attachment)

" Lens Cap (see the right column for

attachment)

* A lithium battery is pre-installed in the Remote

Control Unit at time of shipment (with insulation
sheet). To use the Remote Control Unit, remove
the insulation sheet.

NOTES:

● In order to maintain optimum performance of the

camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.

● Make sure to use the provided cables for

connections. Do not use any other cables.

How To Attach The Lens Cap

To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.

NOTE:

To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.

How To Attach The Shoulder Strap

Follow the illustration.

1

Thread the strap through the eyelet.

2

Fold it back and thread it through the strap

guide and the buckle.

● To adjust the length of the strap, loosen and then

tighten the strap in the buckle.

3

Slide the strap guide fully towards the eyelet.

Provided Accessories

OR

Place here during

shooting.

3

2

2

1

Strap guide

Buckle

Eyelet

GR-D390UC_EN.book Page 12 Wednesday, February 8, 2006 8:59 AM

Advertising