Installation and connection, Precautions for installation, English – JVC LD-HD2KBE Manuel d'utilisation

Page 15

Advertising
background image

15

Installation and Connection

Please read the following carefully when installing this unit.

Minimum Space Required

Precautions for Installation

Installation Environment

This unit is a precision device. Do not install it at the following places. Doing so may cause fire or malfunction of
the unit.
● Where there is water, humidity or dust
● Where the unit may be subjected to oily or cigarette smoke
● On a soft surface such as carpet or cushion
● Where the unit may be subjected to high temperature due to direct sunlight
● When temperature is high or low

Check that it is well ventilated before installing on a rack. When devices that emit heat, such as power amplifiers, are to
be installed on a rack, mount a fan on the rack as well.

Allowable operation temperature range: +5

f to +35 f

Allowable relative humidity range: 20 % to 80 % (no condensation)

Allowable storage temperature range:

-10 f to +60 f

● Any room in which there is cigarette smoke or grease

Even where smoke and grease levels are minimal, prolonged exposure will affect this unit and may cause
malfunctioning.

● Do not place this unit in an enclosed area or block the

air inlets and exhaust vents. Allow sufficient space
around this unit for emission of heat.

● Check that it is well ventilated before installing on a

rack.
When devices that emit heat, such as power
amplifiers, are to be installed on a rack, mount a fan on
the rack as well.

100 mm and above

100 mm and above

100 mm and above

30 mm and above

30 mm and above

ENGLISH

LD-HD2KU_E.book Page 15 Thursday, November 17, 2005 4:27 PM

Advertising
Ce manuel est liée aux produits suivants: