English – JVC LD-HD2KBE Manuel d'utilisation

Page 23

Advertising

.................................................................................................

SET: INPUT HD H-ADJUST

(Horizontal position of HD signals)

Aligns the horizontal position of normal video images to
high quality images (720p/1080i).

● Aligns an appropriate image size with the image position

on the screen by using test patterns from the DVD.
Adjustment is first performed at the

AH/V-PositionB

position of the OSD menu on this unit. This is followed by
the actual adjustment using the HD signals.

.................................................................................................

SET: DVI INPUT LEVEL

(Setting for DVI digital input signals)

Sets the signal level of DVI input signals.

● Sets to match the signal level of your input device.

.................................................................................................

SET: VIDEO INPUT

(Input setting for composite video signals)

Sets whether to use the video input terminal or not.

● When this is set to ADISABLEB (do not use), the AVideoB

item cannot be selected for

AINPUTB in the OSD menu.

● It is not possible to set all terminals to ADISABLEB (do not

use).

ASET: VIDEO INPUTB will be automatically set to

AENABLEB (use) upon doing so.

.................................................................................................

SET: S-VIDEO INPUT

(Input setting for S-video signals)

Sets whether to use the S-video input terminal or not.

● When this is set to ADISABLEB (do not use), the AS-VideoB

item cannot be selected for

AINPUTB in the OSD menu.

.................................................................................................

SET: RGB INPUT

(Input setting for RGB signals)

Sets whether to use the RGB input terminal or not.

● When this is set to ADISABLEB (do not use), the ARGBB

item cannot be selected for

AINPUTB in the OSD menu.

.................................................................................................

SET: YCrCb INPUT

(Input setting for component video signals)

Sets whether to use the component video input terminal
or not.

● When this is set to ADISABLEB (do not use), the AYCrCbB

item cannot be selected for

AINPUTB in the OSD menu.

.................................................................................................

SET: DVI INPUT

(Input setting for DVI digital signals)

Sets whether to use the DVI input terminal or not.

● When this is set to ADISABLEB (do not use), the ADVIB

item cannot be selected for

AINPUTB in the OSD menu.

.................................................................................................

SET: PASSTHRU INPUT

(Pass-through input setting)

Sets whether to use pass-through or not.

.................................................................................................

SET: RGB INPUT SYNC

(RGB sync signal setting)

Sets the sync signal during RGB signal input.

● This setting is enabled when RGB input is selected.
● Select ACOMPOSITE SYNCB for PAL RGB signals.

Setting Values: 0

-50

Default Value: 25

Setting Values: 16-235, 0-255

Default Value: 0-255