JVC LD-HD2KBE - Manuel (Page 32)

32
RS-232C External Control Description (continued)
oNTSC Scan Rate List
● This unit uses NTSC scan rate A1920 ן 1080B. Other scan rates are not used.
oPAL Scan Rate List
● This unit uses PAL scan rate A1920 ן 1080/50HzB. Other scan rates are not used.
oTest Pattern Help Menu
OSDT# (0 -255) 30 (Default value) OSD Timer
OUTMOD (0 = ANALOG YPrPb, 1 = DVI, 2 = ANALOG RGB,
3 = ANALOG RGB+DVI) Output Mode
RB# (0 -100) 100 (Default value) Right Blanking
RD RGB Input disabled
RE RGB Input enabled
SCRTRG# (1 = ON, 0= OFF) 12 V Screen Trigger
SETFT Restore factory defaults
SRN# (1 -12) Select NTSC scan rate
SRNHELP NTSC Scan Rate Help Menu
SRP# (1 -6) Select PAL scan rate
SRPHELP PAL Scan Rate Help Menu
TB# (0 -100) 100 (Default value) Top Blanking
TPHLP Display test pattern Help menu
STHELP Setup Help Menu
VP# (0 -20) 0 (Default value) Vertical Position
VPOL# (0 = Neg, 1= Pos) Vsync Polarity
W# (0 = 4:3, 1= WIDESCREEN, 2= WIDE 4:3) Screen Shape
XD YCrCb Input disabled
XE YCrCb Input enabled
YD S-video Input disabled
YE S-video Input enabled
Code Range Description
SRN1 1400 ן 788 SRN2 1920 ן 540
SRN3 800 ן 600 SRN4 1280 ן 720
SRN5 1024 ן 768 SRN6 1280 ן 768
SRN7 1366
ן 768
SRN8 1440
ן 960
SRN9 1280 ן 1024 SRN10 1365 ן 1024 (DILA)
SRN11 1400 ן 1050 (DILA3) SRN12 1920 ן 1080
SRP1 720 ן 576/50Hz SRP2 720 ן 576/100Hz
SRP3 1280 ן 720/50Hz SRP4 1024 ן 768/75Hz
SRP5 1024 ן 768/100Hz SRP6 1920 ן 1080/50Hz
TP0 Test Pattern Off TP1 Color Bars
TP2 Rev Bars TP3 Grey Step
TP4 Y Ramp TP5 Cb Ramp
TP6 Cr Ramp TP7 Black
TP8 Green TP9 Red
TP10 Blue TP11 Converge
TP12 Border TP13 Multiburst
TP14 Window TP15 Pluge
LD-HD2KU_E.book Page 32 Thursday, November 17, 2005 4:27 PM