Basic shooting (d.s.c. snapshot), Normal playback of images, Digital still camera (d.s.c.) recording – JVC GR-D370U Manuel d'utilisation

Page 24: Playback, D.s.c. recording, D.s.c. playback, Pg. 24, 34), 640 (640 x 480), Pg. 24), Shooting icon

Advertising
background image

MasterPage: Advan_Heading0_Right

24

EN

You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.

NOTE:

Before continuing, perform the procedures listed
below:

Power (

pg. 13)

Loading a Memory Card (

pg. 18)

1

Remove the lens cap.

2

Open the LCD monitor fully. (

੬ pg. 19)

3

Set the VIDEO/MEMORY Switch to

“MEMORY”.

4

Set the Power Switch to “REC” while pressing

down the Lock Button located on the switch.

To change the Picture Quality,

pg. 29, 32.

5

Press SNAPSHOT. The PHOTO” indication

appears while the snapshot is being taken.

To delete unwanted still images, refer to “Deleting
Files”. (

pg. 27)

When you do not want to hear the shutter sound,
set “MELODY” to “OFF”. (

pg. 29, 31)

NOTE:

If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “REC” and power is
supplied from the battery pack, the camcorder shuts
off automatically to save power. To perform shooting
again, push back and pull out the viewfinder again
or close and re-open the LCD monitor.

Approximate Number of Storable Images

The number increases or decreases depending
on the Picture Quality/Image Size, etc.

*

Optional

Basic Shooting (D.S.C. Snapshot)

Image Size/Picture

Quality

SD Memory Card*

8 MB 16 MB 32 MB 64 MB

640 x 480/FINE

47

95

205

425

640 x 480/STANDARD

160

295

625 1285

Image Size/Picture

Quality

MultiMediaCard*

8 MB

16 MB 32 MB

640 x 480/FINE

55

105

215

640 x 480/STANDARD

190

320

645

Power Switch

Lock Button

VIDEO/

MEMORY

SNAPSHOT

Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.

1

Load a memory card. (

੬ pg. 18)

2

Set the VIDEO/MEMORY Switch to

“MEMORY”.

3

Set the Power Switch to “PLAY” while

pressing down the Lock Button located on the
switch.

A stored image is displayed.

4

Press

1

to display the previous file. Press

2

to display the next file.

NOTE:

Images shot and stored on the card with another
device with resolutions other than “640 x 480” will
be displayed as thumbnails only. These thumbnail
images cannot be transferred to a PC.

Normal Playback Of Images

Power Switch

Lock Button

7

6

2

2

2

2

1

1

1

1

MENU

VIDEO/
MEMORY

DIGITAL STILL CAMERA (D.S.C.) RECORDING &
PLAYBACK

D.S.C. RECORDING

D.S.C. PLAYBACK

GR-D370UC_EN.book Page 24 Thursday, January 26, 2006 3:30 PM

Advertising