Jettech Metal Products FX-44 - Manuel (Page 13)

:
The word off switches to on. Keep it on until it is apparent that the detergent delivery pipe has become filled.
Again pressing the button go to the wording “rinse aid pump”.
Fill the rinse aid measuring device pipes following the same instructions provided for the detergent measuring device.
4.11 Checks and inspections:
Check the adjustment screw of the towing system while verifying that it is possible to
stop the baskets from going forward with just the force of your hands. A
complete load of baskets filled with dishes must not block the towing feed
e) Check that the rinse economizer is working well. It has to start delivering hot water
at mains pressure as soon as a basket arrives underneath the rinsing nozzles, and
has to stop when the basket exits. It is advisable to check this when the booster tank
water is cold.
f) Check operation of the machine’s limit switch, which has to block operation of
the feed motor and pump when a basket reaches the end of the surface. Operation
must resume when the basket is removed.
g) Check the sense of rotation of the motors. If they turn against the arrow shown on
the towing actuator, reverse a phase in the power cable socket-outlet.
CAUTION: If the towing turns against the direction of the arrow shown, the
mechanical safety device is not working.
Failure to comply with these checks automatically causes the warranty to be forfeited
AFTER INSTALLATION:
The installer is obliged to inform the manufacturer of any operation or safety problems noticed during the first test.
The machine may be used only after installation. The technician must then issue a declaration that the work has been
performed “in a workmanlike matter”, which he states that all operations have been carried out according to all rules and
regulations prescribed by current legislation.
10