Jettech Metal Products FX-44 - Manuel (Page 12)

“detergent” with the on time expressed in seconds specified.
The on time can be modified by acting on the following buttons: .
The set time will be automatically saved. To exit this mode just keep the C button pressed until the machine-off dashes
are displayed.
We recommend you set the most appropriate value according to the manufacturer’s recommended dose.
Perform a few test washes to complete the adjustment stage.
CAUTION: This menu features items whose setting must not be modified. If some parameters are modified accidentally,
just set the KEY 10 to reset to the default values.
4.10 Commissioning the detergent and rinse aid measuring device
Once the machine is installed, it is possible to load or trigger the pipes of the detergent and rinse aid measuring devices
by following these instructions:
Turn off the machine, lift the hood or open the door and keep the C and D buttons pressed for 5 seconds.
The following will then appear:
Display the following by using the C button:
Confirm the entry to the main menu mode using the D button
Then scroll the various menu items using the A button until the following appears:
“detergent pump”
Now it is possible to enable the measuring device by keeping button D pressed
9