Epson WorkForce 845 - Manuel (Page 33)

Problems and Solutions 33
Print a Network Status Sheet
1. Press , if necessary, and select Setup .
2. Press l or r and select Network Settings .
3. Press l or r and select Confirm Network Settings .
4. Press x to print the status sheet.
Printing and Copying Problems
■ Make sure the size of paper you loaded matches the paper size and source selected on
the control panel or in your printer software.
■ Letter-size paper is automatically selected for copying. If your legal-size document is
cropped, press x, select
Paper and Copy Settings , select Reduce/Enlarge, then
select Legal->Letter .
■ To select two-sided printing in Mac OS X, choose Output Settings from the pop-up
menu. Do not select Layout from the pop-up menu.
■ Position your original against the back left corner of the scanner glass. If the edges are
cropped, move your original away from the edges slightly. Place the document flat
against the scanner glass.
■ Printing stops when an ink cartridge is expended. If a color cartridge is expended, you
may be able to continue printing temporarily with black ink; see the online User’s
Guide for more information. If the black cartridge is expended, you must replace it to
continue printing.
Paper Feeding Problems
■ If paper doesn’t feed correctly, remove the paper and fan the sheets, then reload them
as shown on page 5. Don’t load paper above the tabs on the edge guides.
■ If paper has jammed, follow the steps on the LCD screen. If necessary, check the
following areas:
1. Lift the scanner and carefully remove any paper trapped inside.
Cassini_QG.book Page 33 Monday, June 20, 2011 3:22 PM