eMachines H3120 - Manuel (Page 158)

Adding or replacing a CD or DVD drive www.emachines.com
151
4 Disconnect the power, data, and sound (if attached) cables from the back
of the drive.
5 Slide the drive out of the case toward the front.
6 Slide the new drive into the drive bay from the front of the case.
7 Connect the power, data, and sound cables (if necessary) to the back of
the drive.
8 Use the two screws you removed previously to secure the drive to the drive
bay.
9 Replace the front bezel by following the instructions in “Replacing the
front bezel” on page 147 .
10 Replace the side panel by following the instructions in “Replacing the side
panel” on page 147 .