Elmo Visual Presenter HV-110U - Manuel (Page 6)

6
English
BEFORE YOU USE
„ Use the product under the rated electrical conditions. The power cord
applicable to the local power specifications is attached.Be sure to use
the power cord applicable to your local power specifications.
„ Do not leave this product under direct sunlight or by heaters, or it may be
discolored, deformed or damaged.
„
Do not keep this product in any humid, dusty, salt bearing wind or
vibrating location. Use it under the following environmental conditions:
Temperature: 0°C - 40°C (32°F-104°F)
Humidity: 30% - 85% (No condensation)
„ Use a soft, dry cloth for cleaning. Do not use any volatile solvents such
as thinner and benzene.
„ Do not point the camera lens directly into the sun, or the camera may be
damaged.
„
Luminescent and Black Spots:
There may be some pixels that do not properly operate due to the use of
CCD Area Image Sensors made-up of many pixels. Though luminescent
or black spots may be found on the screen, it is a phenomenon peculiar
to the Sensors and is not a malfunction.
„ Follow the guidelines below to prevent the unit from dropping or
overturning:
• Use this product on a stable base, desk or table. Do not place this
product on unstable base or slant place.
• Place or wire this product to prevent the AC adapter cord or video cable
from pulling.
„ Carry this product holding the lower part of the main unit held in your
both hands. Never hold this product by the column or the camera head.