Elmo Visual Presenter HV-110U - Manuel (Page 21)

21
OPERA
TION
PR
OCEDURE
English
Changing the size of an object
(Digital Zoom)
When you need to zoom in the object in display
on the monitor screen even larger than when the
camera head is in the lowest horizontal position
(object enlarged at the highest level), press the
[ ] and [ ] buttons (Digital Zoom Buttons) to
operate the digital zoom.
[ ] button : To zoom in the object.
[ ] button : To zoom out the object.
The status display LED is in green/blue while the
digital zoom is in operation. Holding down the
[ ] and [ ] buttons at the same time for several
seconds turns the status display LED back to green
and restores the zoom ratio to its factory setting.
When the zoom ratio is changed from the factory
setting by pressing the [ ] button (Digital Zoom
Button), the icon is displayed for a while in the
center of the screen. If you move the object while the
icon is displayed, and shift the area you want to
enlarge to under the icon, you can move the area
to be enlarged to the center of the screen easily.
„
Note
• You can use the digital zoom regardless of the height of the arm.
• The digital zoom degrades the image quality.
• By turning the [ ] (power switch) to [OFF], the setting for the digital zoom can be
canceled (restored to its factory setting).
• The max Digital zoom ratio is 8x.