Elmo Visual Presenter HV-110U - Manuel (Page 19)

19
SETTING UP AND
ST
ORING
English
(3) Connecting to the PC with a USB cable.
Connect a USB cable to the [USB] terminal on the side of the base unit.
Note
• The USB2.0 compliant cable is recommended.
• If you plug a USB cable with the power supply to this product and the PC on, the PC
may not recognize this product.
• Depending on the USB environment of PC or the USB2.0 compliant cable is
recommended. Peripheral units, the image transfer may be disturbed.
• This does not guarantee operations in any environment.
Note
• To protect this product and peripheral devices, unplug the power plug of the AC
adapter and turn OFF the power switches on all other devices before connecting the
video cable.
• Hold the plug of the cable to plug in/unplug the power plug of the AC adapter or the
video cable.
(4) Connecting the AC adapter
Connect the DC plug of the supplied AC adapter to the [DC IN 12V] terminal on the side of
the main unit before inserting the AC adapter into an outlet.
„ Specifications of the analog RGB input terminal of this product
Signal allocation
10 9 8 7 6
5 4 3 2 1
15 14 13
DSUB 15P shrink terminal (Female)
12 11
Video signal :
Horizontal synchronized signal :
Vertical synchronized signal :
Analog 0.7V(p-p) with 75 Ω terminated
TTL level (Positive/negative polarity)
TTL level (Positive/negative polarity)
Pin assignment
Pin No. Name Pin No. Name Pin No. Name
1 Video signal (Red) 6 GND (Red) 11 GND
2 Video signal (Green) 7 GND (Green) 12 N.C
3 Video signal (Blue) 8 GND (Blue) 13 Horizontal sync. signal
4 N.C 9 N.C 14 Vertical sync. signal
5 GND 10 GND 15 N.C