Elmo Visual Presenter HV-110U - Manuel (Page 24)

24
OPERA
TION
PR
OCEDURE
English
Presentation using an optional SD card (SD Mode)
Note
• When loading or unloading the SD card or the power switch is turned OFF, be sure to
confirm that the output image has been turned to the camera image or the PC image
beforehand. If you load or unload the SD card while the mode is set to the SD mode,
the SD card contents could be destroyed or failure could be caused to this product.
• Insert the SD card with the labeled side facing the left side of the front of the main unit.
Forcing it in the wrong way may cause a malfunction.
• An SD card is composed of parts vulnerable to static electricity. Therefore, due to
static electricity, the SD card could malfunction or its contents could be destroyed.
When handling the SD card, take care to avoid static electricity.
• The image data viewable on this product is limited to the image data saved in this product
and the image data converted using the conversion function of the software attached to
this product.
• If you try displaying the image data whose format is not compatible with this product, a
black or gray image will be displayed.
• If you try displaying the image data in the SD card without inserting the SD card, a black
image will be displayed. (The message “NO CARD” will appear on the screen.)
• After using the SD card, do not leave it inside this product, but be sure to remove it.
• Panasonic SD card (256MB or 512MB ) is recommended. The resolution of the image
to be stored is 1024 x 768 (XGA output). This product can store images up to 2048 pcs.
• ELMO is not liable for any damage caused by the loss of the data in the SD card or
passive damage.
• This product is not compatible with SDHC cards. Use an SD card recommended for
this product.
• When the SD mode is selected, the specific software supplied with this prouct can not
be used.
1
Before starting the operation, take the SD cap off and insert an optional SD
card into the SD slot on the front of the camera head.
2
Push the card again to remove the SD card.
Inserting/removing the SD card „