Ba a, Align doors (if needed), Flush the water system – MIDEA Smart 21.6-cu ft 4-Door Counter-Depth French Door Manuel d'utilisation

Page 22

Advertising
background image

22

R

efriger

a

tor

Saf
ety

Oper

a

ting

R

equir

ements

P

arts and

F

ea
tur
es

Ins
talla

tion

R

efriger

a

tor

Use

R

efriger

a

tor

Car
e

Tr

oubleshooting

Bef

or

e

Use

FLUSH THE WATER SYSTEM

After installing the replacement water filter it is important to flush air from

the water line so that water will not drip from the water dispenser.

1.

Turn on the main water supply.

2.

Dispense 2.5 gallons of water (flush for approximately 5 minutes) to

remove trapped air and contaminants from the system.

NOTE:

Do not dispense the entire 2.5 gallon amount continuously.

Depress and release the dispenser pad for cycles of 30 seconds ON

and 60 seconds OFF. In some homes, additional flushing may be

required.

3.

Open the refrigerator door to make sure there are no water leaks

coming from the water filter.

ALIGN DOORS (IF NEEDED)

If the top edges of the refrigerator doors are not aligned, adjust the height

of the lower door.

1.

Raise the lower door so that the top edge is level with the higher door.

2.

Using pliers, insert a snap ring (provided) into the gap between the

hinge-grommet and the lower door hinge.

NOTE:

The number of snap rings used will depend on the size of the

gap.

b

a

a

Snap ring

b

Door hinge

Advertising