Epson WORKFORCE WP-4530 - Manuel (Page 12)

12 Sending a Fax From the Control Panel
Entering Your Phone Number
1. Select Your Phone Number from the Header menu.
2. Use the numeric buttons on the control panel to enter your phone number, up to 20
digits. You don’t need to use dashes. Use the # button to type the + symbol for an
international number.
Press r to enter a space, and l to delete.
3. Press OK to return to the Header menu.
Selecting the Number of Rings to Answer
If you connected an answering machine and it is set to pick up on the fourth ring, you
should set the product to pick up on the fifth ring or later:
1. Press F Setup .
2. Select Fax Settings .
3. Select Communication , then Rings to Answer .
4. Select the number of rings, then press OK . Select more rings than you use for the
answering machine.
Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note: To set up and use a speed dial list or send a fax from your computer using the
Epson FAX Utility, see your online User’s Guide.
1. Place your original(s) for faxing (see page 5).
2. Press Fax .
To fax a two-sided document, place your document in
the ADF. Press x
Menu and select Send Settings .
Then select 2-Sided Faxing and select On .
3. Use the numeric buttons on the control panel to enter
the fax number (up to 64 digits).
4. Press one of the x Start buttons to start scanning and
faxing your document. (To cancel, press y Stop/Reset .)
Note: If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you press the
x Color button.