Curtis GPD430 - Manuel (Page 11)

User’s Guide
6
Acquiring GPS Position
In case there is no GPS signal,
the screen becomes grey. This
can happen under following
conditions:
■ the device is in a place, where
the signal reception from
satellites is obstructed by
buildings, trees, cables or in a
tunnel
■ Sygic DRIVE settings are set
incorrectly
■ Device system settings are set
incorrectly
Information about signal strength
at the bottom of the screen
provides extra information:
If the bars or port name is red,
re-check the GPS settings (see
Installation Manual).
If the bars are grey, stand
outside with the good visibility of
the sky until the signal is
regained and the bars become
green. Tap signal bars or select
Main menu >
GPS Status to
see more detailed GPS
information.
After the GPS signal is regained,
your driving instructions will be
displayed.