Analog Way Octo Vue - OVP831 Manuel d'utilisation
Page 31
OCTO VUE / QUATTRO VUE
Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
PAGE 31
4
[IMAGE] + ENTER.
• If the selected input type is a VIDEO signal the IMAGE MENU displays the following items:
4-1 [Pos.
settings]
+
ENTER.
Select one of the following functions with
+ ENTER.
4-1-1 [H position] + ENTER.
Adjust the Horizontal position with
+ ENTER.
4-1-2 [V position] + ENTER.
Adjust the Vertical position with
+ ENTER.
4-1-3 [H size] + ENTER.
Adjust the Horizontal size with
+ ENTER.
4-1-4 [V size] + ENTER.
Adjust the Vertical size with
+ ENTER.
4-2 [Aspect in] + ENTER.
Select the Aspect Ratio of your input source with
+ ENTER.
• [4/3 standard]: 4/3 input format.
• [16/9 letterbox]: Letterbox input format.
• [WS anamorphic]: Widescreen Anamorphic input format (video) or 16/9 input format (computer).
4-3 [Aspect
out]
+
ENTER.
Select one of the following output aspect ratio with
+ ENTER.
• [Standard]: The entire image and the aspect ratio are preserved.
• [Crop]:
The image is zoomed without deformation to fill the screen, but some borders of the image will
be cropped. The aspect ratio is preserved.
• [Full Screen]: The image is stretched to fill the screen. The aspect ratio is not preserved.
• [Zoom]:
The image can be zoomed, cropped and stretched at your convenience.
4-4 [Brightness]
+
ENTER.
Adjust the Brightness with
+ ENTER.
4-5 [Contrast]
+
ENTER.
Adjust the Contrast with
+ ENTER.
4-6 [Color]
+
ENTER.
Adjust the Color with
+ ENTER.
4-7 [Hue]
+
ENTER.
Adjust the Tint of the picture (NTSC only) with
+ ENTER.
4-8 [U/overscan]
+
ENTER.
Select Underscan or Overscan with
+ ENTER.
• [underscan]: Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan]: Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
4-9 [Preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER
.