Recommended drain hose connection methods, Drain hose to air gap to disposer, Alternate drain hose connection methods – Whirlpool Dishwasher Manuel d'utilisation
Page 8
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Recommended drain hose
connection methods;
Drain hose to air gap to waste tee.
Drain hose to air gap to disposer.
Install air gap (Part No. 300096)* according to kit instruc
tions. If other brands of air gaps are used, they should be
checked to make sure they allow for the same water flow.
Connect the air gap to a waste tee (Part No. 675149)* or
disposer using a rubber connector (Part No. 674381 )*.
Most disposers have ys" connectors or special
connectors are available at plumbing supply houses.
Be sure to remove the disposer plug before
connecting the drain hose.
Alternate drain hose connection
methods;
Drain hose to waste tee.
Cut hose
connector to fit.
Screw-type
clamp
20" (51 cm)
Minimum
clearance
to floor
Entry must be
above trap.
I I
If local plumbing codes permit, dishwasher drain hose may
be connected directly to waste tee (Part No. 675149)*. The
waste tee connection MUST be made ahead of the trap and
a minimum of 20 inches above the floor.
Drain hose to disposer.
Remove
disposer
inlet plug
20" (51 cm)
Minimum
clearance
to floor
Do Not
cut hose
connector.
i
Entry must be
above trap
If local plumbing codes permit, dishwasher drain hose
may be connected directly to a disposer. Most disposers
have y% connectors or special connectors are available
at plumbing supply houses. Be sure to remove the
disposer plug before connecting the drain hose.
*AII parts are available through your dealer.
(continued)
3369671-c