Panasonic WV-BL730 - Manuel (Page 22)

2. Move the pointer to the character to be edited- by
pressing ^ or . Then move the cursor to the
character area and select a new character.
3. Press E) to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press E] ,,AII charac­
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1. Move the cursor to POSl, and press El. The dis­
play shown below appears and the CAMERA ID
starts blinking.
Blinking
2. Move the CAMERA ID to the desired position by
pressing
3. Press E] to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of
is kept pressed for a second or
longer.
To return to the CAM SET up menu
Move the cursor to RET and press El
UP menu appears. The CAM SET
2. Light Control Setting (ALC/ELC)
You can select the mode for adjusting the lens iris.
The modes are as follows:
ALC: Select this mode when an auto iris lens {ALC
lens) is used with this camera.
ELC: Select this mode when a fixed iris lens or manual
iris lens is used with this camera.
—
** CAM SET UP ft«
CAMERA ID OFP n
ALC/ELC ALC “i
SHUTTER OFF
AGC ON
SENS UP OFP
SYNC IHT
MOTION DBT OFP “1
LENS DRIVE DC
END SET UP ENABLE
L________
-
20
-