Panasonic WV-BL730 - Manuel (Page 21)

SETTING PROCEDURES
1. Camera Identification (CAMERA ID)
Setting
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists
of up to 16 alphanumeric characters. You can select
whether to have the camera ID displayed on the moni­
tor screen or not.
Character Cursor
f
** CAM SET DP **
CAMERA ID
ALC/BU; ALC ~l
SHUTTER OFF
AOC ON
SENS DP OFF
STHC INT
MOTION DET OFF 1
LENS DRIVE DC
END SET UP
_______
To edit the CAMERA ID
1. Move the cursor to the CAMERA ID parameter.
2. Press [3. The CAMERA ID menu appears. The
cursor on the letter “0” starts blinking.
Pointer
-JD1234567S9
m CDEFCTIJKUI
BOPQRSTtJVWXYZ
SPACE
POSI RET RED RESET
■ Character
Area
- Command
■ Editing
Area
CAMERA ID menu
3. Move the cursor to the character you want to
change by pressing
4. After selecting the character, press Cs] • The
selected character appears in the editing area.
(The pointer in the editing area moves to the right
automatically at this moment.)
5. Repeat the steps above until ail characters are
edited.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press El ■
To edit a specific character in the CAMERA ID
1. Move the cursor to the editing area by pressing
-
19
-