Sony DVBK-1000 Manuel d'utilisation
Page 9
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
Note
For details on installation,
refer to the instruction
manual for vour PC.
1
Turn off your PC and peripheral equipment.
Disconnect the power cord from the wall outlet
before installing the board.
2
Open your PC case.
3
Insert the capture board firmly into the ISA slot.
(The figure below is an example.)
Had
4
Replace the case on your PC. Then turn on the
power.
Advertising