Breville the Milk Cafe BMF600XL Issue - E11 - Manuel (Page 6)

11
OPERATING yOUR BREvILLE MILK CAFé™
OPERATING
your Breville Milk Café™
BEFORE FIRST USE
Before first use, ensure you have all parts
and accessories - power base, milk jug,
latte disc, cappuccino disc, jug lid and
measuring cap.
Remove and safely discard all promotional
labels and packing materials attached to the
Breville Milk Cafe™.
Wash the milk jug, frothing discs, lid and
measuring cap in warm soapy water then
rinse and dry thoroughly. Wipe the exterior
of the power base with a soft damp cloth
then dry thoroughly.
FROTHING HOT MILK
1. Place the milk frother on a flat level
surface and plug the power cord
into a 110V-120V power outlet.
The START | STOP button surround
will illuminate.
NOTE
After 30 seconds of non-use, the
milk frother will enter standby mode.
The button surround will cease to
illuminate. To reactivate, turn or
press the START | STOP push-dial.
2. Select the ‘Capp’ or ‘Latté’ frothing disc.
Choose the ‘Capp’ disc for thick and
creamy froth or the ‘Latté’ disc for
smooth and silky milk.
WIDER DISC END FACES DOWN
CAPP LATTÉ
3. Insert the frothing disc onto the shaft at
the base of the milk jug. Ensure the disc
is inserted the correct way with the
wider part of the disc at the bottom of
the jug. The disc should ‘click’ securely
onto the shaft.
NOTE
If the disc is not inserted correctly
it may dislodge during operation, a
grinding noise may be heard, or milk
will not swirl.
Do not operate the milk frother
without a frothing disc inserted into
the milk jug as this can cause uneven
heating and burning.
WARNING
Frothing disc is a choking hazard.
Children must always be supervised
and never left unattended with
the appliance.