Breville BDC600XL - Manuel (Page 34)

34
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Steam when
grinding and
brewing
This is normal.
It is the rear steam vent
releasing steam.
Total brewing
time on LCD
screen changes
mid-cycle or is
different each time
The total brewing time
displayed at the start of
the cycle is an estimate
only and may change
mid-cycle or vary each
time depending on the
starting temperature
of the water in the
water tank.
Brewing cycle
finishes before
the ready signal
If using the gold tone
filter, this is normal.
The total brewing time
displayed on the LCD
screen is calculated using
paper filters as coffee
passes through paper
filters slower.
‘CLEAN COFFEE
CHUTE’ on LCD
screen
Coffee grinds chute is
blocked.
• Thoroughly clean the coffee
basket and gold tone filter
to ensure they are clear and
unclogged of any coffee grinds.
• Check the bean hopper for any
foreign body.
• Refer to ‘Cleaning the Grinding
Burrs and Coffee Grinds Chute’,
page 25.
Machine beeps and
displays ‘1’ on the
LCD screen
There is an issue with the
coffee grinds chute disc.
Check the coffee grinds chute disc
for any build-up of coffee grinds.
This is the stainless steel disc that
is visible when the swing-out door
is opened. A build-up of grinds on
this disc can affect the performance
of the machine. Wipe the disc clean
then dry thoroughly. If the problem
persists, call Breville Customer
Service on 1-866-273-8455.
Machine beeps
20 times in fast
succession and ‘2’
is displayed on the
LCD screen
Water tank is overfilled. Call Breville Customer Service on
1-866-273-8455.
BDC600XL_IB_B11.indd 34 25/05/11 1:34 PM