Breville BDC600XL - Manuel (Page 18)

18
USING THE YOUBREW™ - SINGLE CUP MODE
3. Select ‘Single Cup’ Mode
Press the SINGLE CUP button. The LCD
screen will display a cup symbol and the
current cup size selected. Continue pressing
the SINGLE CUP button to select the
desired size.
There are 9 size options to accommodate
for different amounts or milk, half-and-
half and creamer. Below is a guide to the
amount brewed at each setting. Always
ensure your cup is an adequate size for the
setting selected.
SETTING AMOUNT BREWED
1 ~ 7.5oz
2 ~ 9.5oz
3 ~ 11oz
4 ~ 12.5oz
5 ~ 14.5oz
6 ~ 16oz
7 ~ 17.5oz
8 ~ 19.5oz
9 ~ 21oz
The amounts above are approximate only.
Actual amounts may vary due to the type of
filter used, the coffee bean size, roast, blend
and freshness, or amount and type of pre-
ground coffee used.
4. Select the Brew Strength or
‘PRE-GROUND’ Coffee Setting
Press the STRENGTH | FLAVOR button.
The LCD screen will flash the current
strength setting and the and buttons
will illuminate and flash. Use these buttons
to cycle through 7 strength settings from
‘MILD’, ‘STRONG’ to ‘INTENSE’ or for the
‘PRE-GROUND’ coffee setting.
Press the STRENGTH | FLAVOR button to
select. The LCD screen will flash the current
flavor setting.
NOTE
If using pre-ground coffee, select the
‘PRE-GROUND’ coffee setting. This
will disable the burr grinder. Add
pre-ground coffee to the gold tone
filter or a paper filter (8-12 cup, flat
base basket style with ~ 3¼"/8.25cm
base). We recommend 1 level
tablespoon of pre-ground coffee per
5oz/150ml cup of water. Adjust the
amount according to your individual
taste. The maximum capacity for
pre-ground coffee is 16 level
tablespoons. Exceeding this amount
may cause overflow.
5. Select the Flavor Setting
Press the STRENGTH | FLAVOR button
until the LCD screen flashes the current
flavor setting and the and buttons
illuminate and flash. Use these buttons to
cycle through 5 flavor settings from ‘LITE’
to ‘BOLD’. These settings vary the steeping
time of the coffee and water. The ‘LITE’
setting steeps for less time to produce
a light-flavored cup. The ‘BOLD’ setting
steeps for more time for a bolder, more
full-flavored coffee.
Press the STRENGTH | FLAVOR button
to select. The LCD screen will cease to
flash once selected.
BDC600XL_IB_B11.indd 18 25/05/11 1:34 PM