Breville BDC600XL - Manuel (Page 17)

17
USING THE YOUBREW™ - SINGLE CUP MODE
USING THE YOUBREW™
- SINGLE CUP MODE
First Time Use Only
We recommend flushing the machine to
remove any dust particles or residues from
the manufacturing process. Follow the
instructions, ‘Using the YouBrew™ - Carafe
Mode’, ensuring to completely fill the water
tank (Step 1), select ‘12 CUPS’ (Step 3)
and the ‘PRE-GROUND’ coffee setting
(Step 4). However do not add any coffee
to the coffee basket. Once the cycle is
complete, discard the water from the carafe
and repeat the cycle again for best results.
The machine is now ready to use.
1. Fill the Water Tank
Press open the flip-top lid. Pour the desired
amount of cold, preferably filtered water into
the tank using a jug or the provided carafe.
If using the carafe, ensure the carafe lid is
securely locked in place. The LCD screen
will indicate the amount of water in the tank
as it is filled. The machine will beep when
full and the water level float will rise to
indicate the maximum level. Do not exceed
the 12 cup maximum. Doing so may cause
water spillage at the back of the machine.
Close the flip-top lid.
NOTE
Check the water level on the LCD
screen before use. We recommend
always keeping the water tank full.
The water tank should be refilled with
cold, preferably filtered water. Do not
fill with any other liquid.
NOTE
Never pour water into the bean
hopper or grinding chamber area.
Doing so can cause the grinder to
clog. Only re-commence use when
the grinding chamber and grinding
burrs are completely dry. Refer to
Troubleshooting, ‘Moisture clogging
grinder’, page 29.
NOTE
Never fill the water tank once the
coffee machine has started a brewing
cycle. This will affect the volume
dispensed into the cup.
2. Pre-Warm the Cup or Travel Mug
A warm cup will help maintain the coffee’s
optimal temperature and keep coffee hotter
for longer. Fill the cup with hot water for about
30 seconds then discard the water. Place the
cup into position under the drip stop outlet.
TIP
For taller cups and travel mugs,
remove the drip tray at the base of
the machine. Press the OPEN button
to open the swing-out door. Insert
the cup/mug into the drip tray cavity
before closing the swing-out door. The
maximum cup/mug dimensions are
7.5" height, 2¾" diameter.
REMOVE DRIP TRAY, OPEN DOOR,
INSERT CUP, CLOSE DOOR.
BDC600XL_IB_B11.indd 17 25/05/11 1:34 PM