Breville BDC600XL Manuel d'utilisation

Page 13

Advertising
background image

13

BEFORE FIRST USE

BEFORE FIRST USE

Before using the YouBrew™ for the first

time, ensure you have unpacked all

parts and accessories before removing

and safely discarding all packaging

material and promotional labels. Ensure

the power cord is unplugged from the

power outlet.

Wipe the exterior stainless steel

housing with a soft, damp cloth. Wash

the bean hopper and lid, coffee basket,

gold tone filter and carafe in warm,

soapy water and a soft cloth. Do not

use abrasive cleansers, pads or cloths

which can scratch the surface. Rinse

and dry thoroughly.

INITIAL SET UP

1. Install the Bean Hopper
Position the hopper onto the machine.

Turn the locking knob clockwise in the

direction of the LOCK arrow until it

clicks. Fill the hopper with fresh beans.

We recommend always keeping the hopper

full (0.5lb maximum) to ensure there are

sufficient beans. However, never over-pack

the hopper as this may result in the grinder

jamming. Replace the hopper lid.

NOTE

For easy removal, storage and

transfer of beans, the hopper can be

removed by turning the locking knob

counter-clockwise in the direction

of the UNLOCK arrow. If you have

removed the hopper, ensure it is

securely reassembled back onto

the machine. The safety interlock

system will prevent operation if the

hopper is incorrectly assembled. The

LCD screen will flash ‘LOCK BEAN

HOPPER’ until the issue is resolved.

2. Plug in the Power Cord
Unwind the power cord completely and

insert the power plug into a grounded

110-120V power outlet. Press the POWER

button. The LCD screen will illuminate.

NOTE

The coffee machine will enter POWER

SAVE mode after remaining idle for

10 minutes. Press the POWER button

to exit POWER SAVE mode and

re-start the machine.

3. Install the Coffee Basket
For best results, we recommend pre-heating

the coffee basket by running it under

hot tap water. Ensure to dry the coffee

basket thoroughly, taking particular care

to completely dry the chute area. Line the

coffee basket with either the provided gold

tone filter or a paper filter. Never use both

at the same time.

a)

Provided gold tone filter. When using

the gold tone filter, be sure that the

handle is positioned towards the hinge

area of the coffee basket. If you do not,

the handle may interfere with the flow of

ground coffee into the gold tone filter.

HANDLE TOWARDS

COFFEE BASKET HINGE

ENSURE CHUTE

AREA IS

COMPLETELY DRY

NOTE

The gold tone filter will allow some

fine coffee grounds to fall into the

coffee. This will appear as sediment in

the cup or carafe. This is normal.
Only use the gold tone filter provided

as others may cause the machine to

overflow.

BDC600XL_IB_B11.indd 13

25/05/11 1:34 PM

Advertising