Breville BES900XL - Manuel (Page 11)

20 21
AdvANCEd PROGRAMMING
Pre-Infusion Programming
Press UP and DOWN arrows together to
enter PRE-INFUSION programming mode.
Press MENU button to move between
Pre-Infusion Duration (Pd) and Pre-Infusion
Power (PP).
Pre-Infusion duration (Pd)
The LCD will display the current
Pre-Infusion Duration.
Press UP or DOWN arrow to vary time.
We recommend a range between 5-15secs
as being optimum. Press EXIT button to
set the new Pre-Infusion Duration.
Pre-Infusion Power (PP)
The LCD will display current
Pre-Infusion Power as a percentage of total
pump power.
Press UP or DOWN arrow to vary power.
We recommend a range between 55-65
as being optimum. Press EXIT button to
set the new Pre-Infusion Power.
Temperature Unit - ˚f/˚C
Press POWER button to switch machine Off.
While holding DOWN arrow, press the
POWER button. The LCD will display the
current temperature unit (˚F or ˚C).
Press UP or DOWN arrow to select desired
temperature unit. Press the EXIT button to
set the new temperature unit.
Machine Audio
Machine Audio refers to the volume level of
the ‘beeps’ heard.
• HI - high volume
• LO - low volume
• OFF - no volume
Press POWER button to switch machine Off.
While holding UP arrow, press the POWER
button. The LCD will display the current
audio volume.
Press UP or DOWN arrow to select
desired volume. Press the EXIT button to
set the new volume.
Auto Power Off
The AUTO POWER Off feature will switch
the machine Off if it remains idle for more
than 4 hours.
To disable this feature so the machine
remains On continuously, do the following:
Ensure machine is switched Off. Hold down
MENU button and press POWER button.
The current AUTO POWER OFF setting
(ON or OFF) will flash on the LCD screen.
Press UP or DOWN arrow to select
AUTO POWER ON or OFF. Press EXIT
button to set.
ALERTS
STEAM LEd flashing At START UP
The machine will not enter START UP mode
when the STEAM LEVER is in the OPEN
position and the STEAM LED is flashing.
Move the STEAM LEVER to the
CLOSED position for the machine to
enter START UP mode.
hOT WATER LEd flashing At START UP
The machine will not enter START UP
mode when the HOT WATER dial is in the
OPEN position and the HOT WATER LED
is flashing.
Move the HOT WATER dial to the
CLOSED position for the machine to
enter START UP mode.
hOT WATER LEd flashing
The HOT WATER LED will flash when
the hot water function has been operating
for longer than approx. 30 seconds.
Hot water will cease to dispense. Move the
HOT WATER dial to the CLOSED position,
then back to the OPEN position if more hot
water is required.
fill Tank
The machine will detect a low water level.
The FILL TANK icon will be displayed on
the LCD screen. Add water to the tank.
OPERATING yOUR BREvILLE dUAL BOILER™ OPERATING yOUR BREvILLE dUAL BOILER™