NaceCare Solutions ETB1120 - Manuel (Page 9)

9
6 Fit the Brush / Pad (Fig 9).
Push in the deck
locking pin (Fig 10)
and rotate the
brush deck into
the operating
position (Fig 11).
Fig 9
7 Turn on the clean water tap (Fig 12).
8 To start: hold either trigger and press the yellow start button once
(Fig 13).
Brush, vacuum and water settings can be controlled by the control panel
(See Page 13).
Fill the clean-water tank to a Max of 11 gal (see page 11)
For operation and cleaning controls (see page 13)
Failure to rectify the problem or in the event of a breakdown contact your
Nacecare dealer or the Nacecare Technical help line +44 (0) 900 1 905 785 0038
Fig 12
Fig 13
Fig 10
Fig 11
On
Off
Off-Aisle Cleaning Kit (Optional Extra Accessory) 606168