NaceCare Solutions ETB1120 - Manuel (Page 12)

12
Machine Operation
Pre-scrub mode
The ETB machine has been designed to cope with a variety of floor types and different levels of soiling.
On heavily soiled floors use a ‘double scrub’ technique.
First pre-scrub the floor with the floor-tool in the raised position, allow the chemical time to work, then scrub the area a
second time with the floor-tool lowered.
Floor tool in use
The clean-water / chemical mix is dispersed via ‘THRU-FEED’ system.
The waste water is then retrieved by the floor-tool.
Overlap the scrubbing path by 4” to ensure an even clean (Fig 23).
Fig 23
Fig 24
Ref to (Fig 18) to raise and lower the floor tool.
If streaking occurs, wipe
the floor-tool blades
clean (Fig 24).
Note Care must be taken to reduce speed when cornering or when manoeuvring around obstacles.
Note: The machine will still reverse with the floor tool in the lowered position, this could possibly damage the
blades. Raise the floor tool before reversing.
Fig 25
Fig 26