Napoleon Fireplaces FIBERGLOW GL18E - Manuel (Page 9)

9
W415-1071 / C / 01.11.12
4.3 LOG PLACEMENT
Phazer TM logs, exclusive to Napoleon Appliances, provide a unique and realistic glowing effect that is different
in every installation. Failure to follow these log placement instructions may cause sooting.
A. Place the rear log #1 onto
the locating studs on the
rear log support. B. Position the holes on the
bottom of log #2 onto the
fi bre embosses shown. C. Position the bottom cavity
of log #3 onto the bracket
located in the front right
corner.
D. Position the pins on the
bottom of log #4 into the
holes on the left end of
log #1 and the left end of
log #2. E. Place the end of log #5
on the right end of log
#1. The fork in the log
should straddle the knot
on top of the log #2.
Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
Positioning the logs improperly will cause fl ame impingement and carboning.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. Use only
certifi ed Phazer
TM logs available from your authorized dealer/distributor.
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A