Napoleon Fireplaces GDI30G - Manuel (Page 12)

12
W415-0832 / C / 06.07.12
5.0 FINISHING
A. Before servicing, allow the appliance to
cool completely.
B. Release the top and bottom door latches,
located at the right side of the door.
C. To access the lower door latch lift up on
the front edge of the valve access door to
open.
5.1 4 SIDED SURROUND
DOOR LATCH
VALVE ACCESS DOOR
!
WARNING
ENSURE THE UNIT IS COMPLETELY COOL BEFORE STARTING INSTALLATION.
ON/OFF
SWITCH
LIGHT
SWITCH ON
OFF
ON
OFF
VALVE ACCESS
DOOR
FRAME
SHOULDER
SCREWS
A. Connect the
two black on/off switch wires
(already connected to the
frame) to the white and green
wires located on the lower right
hand side of the appliance control
compartment.
B. Connect the black light switch wire
(already connected to the frame) to
the transformer wire (black with blue
connector).
C. Slide the black 48” wire from the control
compartment through the bushing in the bottom right corner of the frame and connect it to the light
switch.
D. Line up the holes in the back of the frame with the holes in the appliance. Secure using the screws
provided.
E. Align the notches on the side of the valve access door with the shoulder screws, making sure it moves
up and down freely.
5.2 DOOR REMOVAL AND INSTALLATION