Warning – Napoleon Fireplaces EPA 1100 Manuel d'utilisation

Page 29

Advertising
background image

29

W415-0763 / B / 10.28.11

!

WARNING

DO NOT USE SUBSTITUTE MATERIALS.

GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.

CARE MUST BE TAKEN WHEN REMOVING AND DISPOSING OF ANY BROKEN DOOR GLASS OR

DAMAGED COMPONENTS. BE SURE TO VACUUM UP ANY BROKEN GLASS FROM INSIDE THE

APPLIANCE BEFORE OPERATION.

DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS

REMOVED, CRACKED, BROKEN OR SCRATCHED.

56.2

8.6 GLASS

REPLACEMENT

8.5 CHIMNEY

CLEANING

86.1

Both the chimney and the appliance must be inspected and cleaned if necessary at least once a year.
For serious wood burners, chimney cleaning must be done as needed to avoid chimney fi res; the venting
systems for controlled combustion appliances may need cleaning as often as once a month. These rates,
however, depend on the burning habits of the individual operating the appliance. For example, it is possible to
clog a solid fuel appliance chimney in a few days if slow, smoldering fi res are burned and the chimney is cold.
NOTE: Appliances burned consistently without hot fi res may result in signifi cant creosote
accumulations in the chimney.

Certain items and considerations are important in chimney cleaning:

Proper tools should be used, including a brush specifi cally designed for chimney cleaning.

The chimney connector and dampers as well as the chimney should be cleaned.

• The

appliance’s

fi rebox and baffl e system should be cleaned if needed.

The chimney should be inspected and repairs made if needed, preferably by a qualifi ed chimney
sweep or mason.

U-SHAPED
GLASS
GASKET

½” ROPE
DOOR
GASKET

A.

When the appliance is cool, open
the door and place the door frame
down careful not to scratch the paint.

B.

Remove the screws and retainers.
The side retainers are held into
place with the top and bottom
retainers. Remove all broken glass.

C.

Wrap the edges of the new glass
with a U-shaped strip of fi berglass
gasket, covering 1/4” on each side.

D.

Place the glass with the fi berglass
gasket in position and resecure the 4
retainers. When fi nished, you should
be able to move the glass slightly,
horizontally and vertically.

NOTE: For replacement glass see “REPLACEMENTS” section.

Advertising
Ce manuel est liée aux produits suivants: