Warning – Napoleon Fireplaces Ascent Multi-View - BHD4 Manuel d'utilisation

Page 50

Advertising
background image

W415-1285 / 04.14.14

50

EN

5.4

DO NOT CLEAN GLASS WHEN HOT! DO NOT USE
ABRASIVE CLEANERS TO CLEAN GLASS.

Buff lightly with a clean dry soft cloth to remove accumulated
dust or fi ngerprints. Clean both sides of the glass after the
fi rst 10 hours of operation with a recommended fi replace
glass cleaner. NOTE: Vinegar-based or ammonia-free
glass cleaners have generally demonstrated an ability
to provide a clean, streak free glass surface.

Thereafter

clean as required. If the glass is not kept clean permanent discoloration and / or blemishes may result.

Do not contact the inside surface of the glass with razor blades, steel wool or other metallic objects as a thin
layer of metal removed from the object may be deposited onto the coating which results in a discoloured stain
or scratch like mark. Such marks are not removed using the normal cleaning procedures given but require
specialized techniques.

Contact you local authorized dealer / distributor for complete cleaning instructions.

HOT GLASS WILL

CAUSE BURNS.

DO NOT TOUCH GLASS

UNTIL COOLED.

NEVER ALLOW CHILDREN

TO TOUCH GLASS.

!

WARNING

10.2 GLASS / DOOR REPLACEMENT

!

WARNING

DO NOT USE SUBSTITUTE MATERIALS.

GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.

CARE MUST BE TAKEN WHEN REMOVING AND DISPOSING OF ANY BROKEN DOOR GLASS OR

DAMAGED COMPONENTS. BE SURE TO VACUUM UP ANY BROKEN GLASS FROM INSIDE THE

APPLIANCE BEFORE OPERATION.

DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS

REMOVED, CRACKED, BROKEN OR SCRATCHED.

56.2

A.

Place the door frame face down careful not to scratch
the paint.

B.

Center the gasketed glass inside the door frame with the
thick side of the gasket facing up.

C.

Bend the glass retainers located along the edge of the
door frame over the gasket holding the glass in place.
Be careful not to break the glass.

GASKET

DOOR
FRAME

GLASS

GLASS

RETAINERS

10.3 CARE OF GLASS

37.1B

Re-assemble the various components in reverse order.

Inspect the relief system. The appliance relieves through the main glass door or through the fl aps on the
fi rebox top. Ensure they open freely, and close sealed.

Advertising
Ce manuel est liée aux produits suivants: