Napoleon Fireplaces STARfire 70 - GD70 - Manuel (Page 32)

32
W415-0434 / G / 08.08.11
1
5
4
3
2
A. Centre the two charcoal strips, as shown,
along the inside front of the fi rebox.
Place the rear log #1 onto the locating studs
along the back edge of the PHAZERAMIC
TM
burner.
B. Position log #2 onto the locators on the
PHAZERAMIC
TM burner.
C. Position log #3 onto the right most grate rail
with the charred face to the front. Align the
groove on the underside of the log, with the
rail of the grate. Push the log back to the pilot
housing. Log #3 should fi t tight against log
#2. D. Place log #4 with the charred branch pointed
inward. Locate the pins into the holes in log
#1 and log #2, this will hold the rear log in
position.
E. Place the end of log #5 on the right end of
log #1. The fork in the log should straddle the
knot on top of log #2.