Sony MEX-BT3000P Manuel d'utilisation
Page 8
8
Disc slot
Insert the disc (label side up), playback
starts.
Display window
AUX input jack page 24
(eject) button
To eject the disc.
MODE button*
1
Radio
:
To select the radio band (FM/AM).
Bluetooth Pandora®
:
To enter the bookmark mode (press and
hold).
Bluetooth phone
:
To activate/deactivate the appropriate
device (this unit/cellular phone).
Front panel release button page 6
PTY (Program Type)/CAT
(Category)
*
2
To select PTY in RDS.
Bluetooth Pandora®
:
To see a list of your stations.
Number buttons
Radio
To receive stored stations (press); store
stations (press and hold).
CD
:
/: ALBUM / (during MP3/
WMA playback)
To skip an album (press); skip
albums continuously (press and
hold).
: REP*
4
: SHUF page 11
: PAUSE
To pause playback. Press again to
resume playback.
Bluetooth Audio
*
3
:
/: ALBUM /
: REP*
4
: SHUF page 19
: PAUSE
To pause playback. Press again to
resume playback.
Bluetooth Pandora®
:
/: Thumbs down ()/up ()
(press and hold for 1 second) page 21
: PAUSE
To pause playback. Press again to
resume playback.
Bluetooth phone
To call a stored phone number (press);
to store a phone number as a preset
(press and hold) (in the call menu).
: MIC (during a call) page 17
To set the MIC gain (press); to
select Echo Canceller/Noise
Canceller mode (press and hold).
DSPL (display)/SCRL (scroll) button
page 10, 11, 15, 19, 21, 25
To change display items (press); scroll a
display item (press and hold).
Receptor for the remote
commander
Microphone (on the inner panel)
To make the handsfree function work
properly, do not cover the microphone
with tape, etc.
*1 If a SiriusXM Connect tuner is connected:
when
is pressed, the
connected device (“SIRIUSXM”) will appear
on the display. Press
to select the
desired SiriusXM Connect tuner band.
*2 When a SiriusXM Connect tuner is
connected.
*3 When a Bluetooth audio device (supports
AVRCP of Bluetooth technology) is
connected. Depending on the device, certain
operations may not be available.
*4 This button has a tactile dot.
Note
If the unit is turned off and the display
disappears, the unit cannot be operated with the
remote commander unless
on
the unit is pressed, or a disc is inserted to activate
the unit first.