Sony MEX-BT3000P - Manuel (Page 32)

32
– Move your car to a place where you can
enhance the cellular phone’s signal if the
reception is poor.
The volume of the connected audio device is
low (high).
 Volume level will differ depending on the
audio device.
– Adjust the volume of the connected audio
device or this unit.
No sound is heard from the Bluetooth audio
device.
 The audio device is paused.
– Cancel pause of the audio device.
The sound skips during playback of a
Bluetooth audio device.
 Reduce the distance between the unit and the
Bluetooth audio device.
 If the Bluetooth audio device is stored in a case
which interrupts the signal, remove the audio
device from the case during use.
 Several Bluetooth devices or other devices
which emit radio waves are in use nearby.
– Turn off the other devices.
– Increase the distance from the other devices.
 The playback sound stops momentarily when
the connection between this unit and the
cellular phone is being made. This is not a
malfunction.
The connected Bluetooth audio device
cannot be controlled.
 Check that the connected Bluetooth audio
device supports AVRCP.
Some functions do not work.
 Check if the connecting device supports the
functions in question.
The name of the other party does not appear
when a call is received.
 The calling phone is not set to send the phone
number.
A call is answered unintentionally.
 The connecting phone is set to answer a call
automatically.
 “AUTO ANSWER” of this unit is set to
“ANS-1” or “ANS-2” (page 13).
Pairing failed due to time out.
 Depending on the connecting device, the time
limit for pairing may be short.
– Try completing the pairing within the time.
Bluetooth function cannot operate.
 Turn off the unit by pressing 
for more than 2 seconds, then turn the unit on
again.
No sound is output from the car speakers
during handsfree call.
 If the sound is output from the cellular phone,
set the cellular phone to output the sound from
the car speakers.
Pandora® connection is not possible.
 Shut down the Pandora® application on the
mobile device, and then launch again.
Error displays/Messages
BT BUSY (Bluetooth Busy)
 The phonebook and the call history of the
cellular phone are not accessible from this unit.
– Wait for a while, and then try again.
EMPTY
 The call history is empty.
 The phonebook is empty.
ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 Press  (eject) to remove the disc.
 BT Initialize failed.
 Phonebook access failed.
 Phonebook content was changed while
accessing the cellular phone.
– Access the phonebook in the cellular phone
again.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.