Samsung HT-D5100-ZA - Manuel (Page 54)

54
English
Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
) button to select the preset
station.
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/
CH (
) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
) button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO
for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the FUNCTION button to select FM.
Press the TUNING/CH ( ) button to select
<89.10>.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
Press the TUNER MEMORY button
again.
Press the TUNER MEMORY button before
NUMBER disappears from the display.
NUMBER disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 4.
To tune in to a preset station, press the
TUNING/CH (
) button to select a
channel.
1.
2.
•
•
•
•
•
1.
2.
3.
•
4.
•
•
5.
•
C
TUNER
MEMORY
Connecting iPod/iPhone Using the USB Cable
If the system is connected to iPod/iPhone, you
can play music in iPod/iPhone using the system.
5V
500mA
ASC IN ASC IN
50
Connect iPod/iPhone using the USB cable to
the front USB port.
Your iPod is automatically turned on.
“iPod” message appears on the TV
screen.
Press the ENTER button.
Select the music fi le to play.
- You can use the remote control or the
product to control simple playback functions
such as the PLAY, PAUSE, STOP, # /$
and /buttons. (See page 16.)
NOTE
If you want to return to the iPod menus with
iPod player connected using the USB cable,
press FUNCTION on the remote control or
press
on the front panel of the system and
select R. IPOD. The FUNCTION mode
switches as follows: BD/DVD D. IN
AUX R. IPOD W. IPOD FM
Use iPod/iPhone with a Wireless Dock
Cradle (sold separately) for iPod/iPhone
You can enjoy fi ner quality music through the
speakers by transmitting an iPod/iPhone’s audio
signal using a Wireless Transmitter.
To connect the main unit when the product is
used for the fi rst time, you have to set the Linking
ID manually. (see page 56)
After fi rst setting of the main unit, it will be
connected to Wireless Transmitter automtically
when turn on.
1.
•
•
2.
3.
✎

HT-D5100_XAC_1224.indd 54 HT-D5100_XAC_1224.indd 54 2011-12-24 12:47:42 2011-12-24 12:47:42