Installation instructions, Warning – GE GTUP240EMWW Manuel d'utilisation

Page 9

Advertising
background image

Installation Instructions

9

6

24” MODELS ONLY:

DRYER EXHAUST TO RIGHT, LEFT OR
BOTTOM CABINET

WARNING -

BEFORE PERFORMING

THIS EXHAUST INSTALLATION, BE SURE

TO DISCONNECT THE APPLIANCE FROM

ITS ELECTRICAL SUPPLY. PROTECT YOUR

HANDS AND ARMS FROM SHARP EDGES

WHEN WORKING INSIDE THE CABINET. BE

SURE TO WEAR GLOVES.

• Apply duct tape as shown on the joint between the dryer

internal duct and the straight duct pipe.

WARNING-

Internal duct joints must be

secured with tape, otherwise

they may separate and cause

a safety hazard.

FLOOR

For downward venting, rotate elbow

sections so that elbow points downward

ADDING ELBOW AND DUCT FOR

EXHAUST TO LEFT OR RIGHT SIDE OF

CABINET

• Rotate elbow sections so that the opening points to the

side to which you want to vent. Preassemble 4” elbow with

4” duct. Use only 4” UL approved rigid metal for ducting

inside the dryer.

• Connect duct assembly to the internal elbow.

WARNING-

Be sure not to pull or damage the

electrical wires inside the dryer when inserting the duct.

4” UL approved rigid metal

DUCT
TAPE

27” MODELS ONLY:

DRYER EXHAUST TO RIGHT, LEFT OR

BOTTOM CABINET

WARNING -

BEFORE PERFORMING

THIS EXHAUST INSTALLATION, BE SURE

TO DISCONNECT THE APPLIANCE FROM

ITS ELECTRICAL SUPPLY. PROTECT YOUR

HANDS AND ARMS FROM SHARP EDGES

WHEN WORKING INSIDE THE CABINET. BE

SURE TO WEAR GLOVES.

For downward venting, rotate elbow

sections so that elbow points downward.

EXHAUST TO LEFT OR RIGHT SIDE OF

CABINET

• Rotate elbow sections so that the opening points to the

side to which you want to vent. Preassemble 4” elbow with

4” duct. Use only 4” UL approved rigid metal for ducting

inside the dryer.

• Connect duct assembly to the internal elbow.

WARNING-

Be sure not to pull or damage the

electrical wires inside the dryer when inserting the duct.

• Apply duct tape as shown on the joint between the dryer

internal duct and the straight duct pipe.

WARNING-

Internal duct joints must be

secured with tape, otherwise

they may separate and cause

a safety hazard.

REMOVE

DESIRED

KNOCKOUT
21/<

Advertising
Ce manuel est liée aux produits suivants: