Rinnai 4500 - Manuel (Page 6)

6 Rinnai Corporation ROF4500
Assembly Specifications
Burner Assembly
The major component of the Rinnai outdoor fireplace is the burner
assembly. This consists of a tube burner with an open tray filled with
pumice and stones.
A SIT pilot burner is positioned along the tube burner to ensure
positive lighting and is covered by a perforated guard to prevent the
pumice from blocking the burner.
The gas control, pressure regulator, and spark ignition system are
positioned at the right end of the tube burner.
The complete assembly is fitted with a stainless steel 404 body
including a weather cover. The cover is placed over the burner for
protection from wind and rain when the unit is not in use.
Body Assembly
The outer body assembly is included with the single sided (ROF4501)
and see-through (ROF4502) models. One of these models must be
used if installation is into a combustible enclosure.
It consists of a construction with an open front (pictured) or with open
front and back (see-through).
Body Assembly with Glass Doors
The body assembly has optional tempered glass, double bi-fold doors
to reduce the effects of wind or rain on the burner. The appliance can
operate with the doors open or closed.
The appliance operates with the bi-fold doors with air being drawn into
the combustion chamber through the lower half of the open front and
expelled out the top or through the top louvers of the glass doors.
Steel Frame Consoles
Steel frame console modules are available which can reduce installation time and provide design flexibility for any
outdoor area. These console modules are available as accessory items. Please refer to the steel frame modular
system installation manual for additional instructions.
1
1
2
Base and Door Modules
1. Base Module (R2632)
2. Door Module (R2631)
1
1
3
3
Base and Spacer Modules
1. Base Module (R2632)
3. Spacer Module (R2633)