Napoleon Fireplaces GDI-30P - Manuel (Page 18)

18
W415-0384 / C / 07.15.08
- The remainder of the product will use both square and the round terminals. The square illustrations need to
be updated to the new design(defl ector). We need to add the round terminal (GD222R) to replacement parts
list.(both illustration and part number)
From Dana 05.10.02
- Roger also reminded me that he does not want to list the GD422R round terminal and consequently
does not want it to appear in any of the instructions. The new BGD40 shows this component and must be
removed.
GD-303 Vinyl Siding Shield
Please edit this part out of our instructions when you edit in the new design of GD-222 and GD-422 terminals.
These new terminals have the built in shield therefore the 303 is not needed.
Cliff
9) All appropriate manuals including:
BGD42 - p.20. BGD38 - p.21, GD36 - p.24, BGNV36 - p.9, GVF36 - p.12
Under Fan Installation - the last paragraph “ Attach the connectors..” must be removed. This statement refer-
ences the thermaldisc which is a seperate instruction (gd36 KT) In it’s place add:
Plug the harness cord into the receptacle.
Use GD70 manual as a reference as it is correct.
10) New HPA logo on the front page of all manuals.
11) Remove Gamma logos from all printed matter - as per facsimile dated March 6th, 2002 from Roger.
12) ALL direct vent instructions. Under “INSTALLATION - USING FLEXIBLE VENTING COMPONENTS - Hori-
zontal Air Terminal Installation:
See BGD40 manual W415-0299
13) All Manuals under “ACCESSORIES” change:
W660-0002 HAND HELD WIRELESS REMOTE SWITCH
to
W660-0013 MODULATING REMOTE
14) Change all ISO 9002 references to ISO 9001:2000, including logo and warranty. SEE W415-0223 GDIZC
manual.
15) Drop Dates on ALL Standards in ALL manuals.
ex.
FROM
In absence of local codes, install to the current CAN1-B149 Installation Code in Canada or to the National Fuel Gas Code,
ANSI Z223.1-1988, and NFPA 54-1988 in the United States. Mobile home installation must conform with local codes or in
the absence of local codes, install to the current standard for gas equipped mobile housing CAN/CSA Z240 MH Series in
Canada or ANSI Z223.1-1988 and NFPA 54-1988 in the United States.
TO
In absence of local codes, install to the current CAN1-B149 Installation Code in Canada or to the National Fuel Gas
Code, ANSI Z223.1, and NFPA 54 in the United States. Mobile home installation must conform with local codes or in the
absence of local codes, install to the current standard for gas equipped mobile housing CAN/CSA Z240 MH Series in
Canada or ANSI Z223.1 and NFPA 54 in the United States.
15) Add or change in the cases of NV and DV models:
- Mobile home installation blurb
-
This fi replace is approved for bathroom, bedroom and bed-sitting room installations and is suitable for mobile
home installation.
All other references to bedroom, etc type of installations should be removed.