KITCHENAID KDRP407H - Manuel (Page 26)

2. Remove glass light cover by grasping the
front edge of cover and pulling it away
from the side wall of the oven.
3. Remove the light bulb from its socket.
Replace the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
4. Replace the light cover by snapping it
back into wall.
5. Plug in oven or reconnect power.
U
sing and C aring for Y our Oven
Using and replacing
the oven lights
The oven lights will come on when you open
the oven door or when any function (other
than CLEAN and PROOF) is selected.
NOTES:
• Make sure the oven is cool before
replacing the light bulb.
• The oven lights will not work during the
Self-Cleaning or Proof cycles.
Replacing the oven light:
1. Unplug oven or disconnect power.
26
Cleaning Stainless Steel Surfaces
• Do not use steel wool or soap-filled scouring pads.
• Rub in the direction of the grain line to avoid marring the surface.
• Always wipe dry to avoid water marks.
• KitchenAid ™ Professional Formula Stainless Steel Cleaner & Polish is the cleaner
recommended for cleaning stainless steel surfaces on this product. To order, call our
Factory Parts and Accessories Center at 1-800-442-9991, or order on-line at
www.applianceaccessories.com and ask for part number 8171420.
• If commercial cleaners are used, follow label directions. If product contains chlorine
(bleach), rinse thoroughly and dry with a soft, lint-free cloth. Chlorine is a corrosive
substance.
CLEANING AGENT
Routine cleaning
and fingerprints Liquid detergent soap and
water, all-purpose cleaner Wipe with damp cloth or sponge,
then rinse with clean water and
wipe dry.
Stubborn stains
and baked-on
residue Mild abrasive cleanser or
stainless steel cleaners Rub in the direction of grain lines
with a damp cloth or sponge and
cleaner. Rinse thoroughly.
Repeat if necessary.
Hard water spots Vinegar Swab or wipe with cloth. Rinse
with water and dry.
HOW TO USE
4452761Av04c52 1/11/00 8:18 AM Page 26