Sony DSR-20/20P - Manuel (Page 39)

Chapter 3 Menu Settings
Chapter 3 Menu Settings
39 EN
Menu options Set this option to Description of settings
REMOTE CONTROL
RS232C BAUD RATE
DISPLAY POSITION
CAUTION DISPLAY
BEEP
INDEX WRITE
CASSETTE MEMORY SEARCH
CASSETTE MEMORY ERASE
TIME CODE
(DSR-20 only)
AUTO OFF
AUTO REWIND
PHOTO PB
CLOCK SET
HOURS METER
DV EE OUT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9600bps
19200bps
CENTER
LOWER RIGHT
ON
OFF
ON
OFF
AUTO
OFF
AUTO
OFF
ALL DATA
INDEX DATA
DATE DATA
PHOTO DATA
AUTO
NDF
DF
ON
OFF
ON
OFF
FIELD
FRAME
DRUM ROTATION
THREADING
ON
OFF
Chapter 3 Men
u Settings
Set the command mode (VTR1-6, INST) on this VCR. Change this
setting when using infrared remote commander or external (remote)
equipment to remotely control the unit. When using the supplied remote
commander, select VTR4 (initial setting). When using the remote
controller such as the optional DSRM-10 or SVRM-100A, select INST.
When selecting OFF, you cannot remotely control the unit.
To set the baud rate with an editing controller that supports RS-232C
interface to 9600bps.
To set the baud rate to 19200bps.
To display the tape counter in the center of the monitor screen.
To display the tape counter in the lower right of the monitor screen.
To display the error message on the monitor screen.
Not to display the error message.
To output a beep sound when an illogical operation is made.
To deactivate it.
To record index signals when recording begins.
Not to record index signals.
To search recordings with the cassette memory. If the tape does not
have a cassette memory, the VCR will search recordings using index
signals recorded on the tape itself.
To search recordings using the index signals recorded on the tape.
To erase all the data in the cassette memory.
To erase index data in the cassette memory.
To erase date data in the cassette memory.
To erase photo data in the cassette memory.
Note
When using the cassette whose memory can store over 16 kbits of
data, you can only select ALL DATA.
To set the time code to the same one as already recorded on the
tape.
To set the time code to Non Drop Frame.
To set the time code to Drop Frame.
Note
If you use AUTO and start recording at the beginning of the tape, the
time code is set to Non Drop Frame.
To turn off the VCR automatically if there is no operation and the tape
stops for an hour (Auto Off) .
To deactivate Auto Off.
To rewind the tape to its beginning automatically if the tape reaches to
an end (Auto Rewind).
To deactivate Auto Rewind.
To prevent the picture from blurring when playing a tape recorded in
photo mode.
To see clear picture when playing a still picture.
Note
When using FRAME, the picture recorded in photo mode may blur.
Set the clock on this VCR so that the recording time can be written into
the index signal.
Using
˘ / ≥ and SET buttons, set the date and time.
The digital hours meter keeps cumulative counts of the head drum
rotation time and the number of unthreading operations. These counts
can be displayed on the monitor screen and are unresettable.
The cumulative total hours of drum rotation with tape threaded is
displayed in 10-hour increments.
The cumulative number of tape unthreading operation is displayed in
10-operation increments.
To output the selected line input signals from the DV jack.
To output only playback video and audio signals from the DV jack.