Sony TA-VE810G - Manuel (Page 41)

41 GB
Getting Started Front Panel Operations
Set up parameters
Centre mode
Initial setting is : CENTER [NORMAL]
See page 18 for details.
p DISPLAY set up
Dimmer level
This setting lets you select brightness of the display on the
front panel.
• You can select between four different settings.
Control A1 mode
Initial setting is : CTRL A1 [AUTO]
This setting lets you specify the display mode for Control A1
components.
• AUTO displays “PLAY”, “STOP”, “PAUSE” or “REC” for
about 8 seconds when the operation switches.
• FIX displays “PLAY”, “STOP”, “PAUSE”, “REC” or the
contents of a disc or track memo of a CD or MD at all
times.
• OFF turns off the operation status display.
Notes
• This setting is only effective when the IR code setting is
set to Sony Control A1.
• If the disc or track memo contains a character that the
amplifier cannot display, “.” appears for that character.
p FUNCTION set up
VIDEO1, VIDEO2, LD/DVD, SATL, TAPE, DAT/MD, CD,
TUNER, PHONO
Initial setting is : YES
These settings let you delete the names of unconnected
components from the function lists.
• YES displays the name of the respective component
(jacks).
• NO deletes the name of the respective component (jacks).
Notes
• When a function is set to “NO”, it cannot be selected.
• If an S-LINK signal (Control A1, Control-S) is input to
the S-LINK jack from a component whose function was
set to “NO”, the function will automatically switch to
“YES” and that function will be selected.
Customizing the Amplifier
Operations
The menu operations allow you to customize various
aspects of the amplifier to suit your listening
environment, your speakers, your components, and
your personal preferences.
For the on-screen speaker setup operations, see page
19.
1
Press SET UP.
“SET UP” appears in the display.
2
Press SET UP repeatedly to display one of the
following menus:
CENTER MODE
DISPLAY SETUP
FUNCTION HOOKUP
3 Use digital processing control buttons ( / ) to
select the parameter you want.
4 Use digital processing control buttons ( / ) to
adjust the parameter.
5
Repeat steps 2 and 4 to make all necessary
adjustments.
6
Press SET UP twice to exit the set up mode.