Sony TA-VE810G - Manuel (Page 20)

20 GB
Playback/Recording
Selecting a Component
You can listen to or watch a connected component by
clicking on the component in the on-screen display.
Before you begin, make sure you have:
• Registered the IR codes for the connected
components (see pages 13 to 17).
• Turned MASTER VOL on the front panel to the
leftmost position (0) to avoid damaging your
speakers.
• Set the Auto Play function to ON. (The factory
setting is ON, see page 30.)
• Selected the appropriate speaker system (see page 8).
• Set BALANCE on the front panel to the centre
position.
1
Press the button on the remote once or twice to
turn on the amplifier.
The TV turns on automatically, and the main
menu appears. If the TV does not turn on
automatically, see pages 13 to 14 to register your
TV.
2 Click FUNCTION in the main menu.
3
Click the component you want.
The control buttons appear, then the component
turns on and starts playing automatically.
To listen to or watch Click* 1
TV programmes* 2 or video tapes VIDEO 1, VIDEO 2
or VIDEO 3
Laser Discs (LD) or DVD LD/DVD
Satellite broadcasts SATL
Digital Audio Tapes (DAT) or DAT/MD
MiniDiscs (MD)
Compact Discs (CD) CD
Radio programmes TUNER
Records PHONO* 3
Analog audio tapes TAPE
* 1 If you connect the component to jacks other than
those specified in the table, click the appropriate one
according to your connection (e.g., If you connect the
LD player to the VIDEO 3 jacks, click VIDEO 3 to
watch the LD).
* 2 For details about watching TV programmes, see page
21.
* 3 Control buttons do not appear when you select
PHONO.
4 Use VOL + or – on the remote to adjust the
volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.
To operate the selected component, click the
control buttons. For details of the functions of the
control buttons, see the instructions of the
selected component. To display other control
buttons for the selected component, click SUB.
Control buttons
FUNCTION SOUND SETUP
VIDEO 1 TAPE
DAT / MD
VIDEO 2
CD VIDEO 3
TUNER L D / DVD
PHONO SATL
MACRO 1
MACRO 2
FUNCTION SOUND SETUP
USER SUB INPUT
( ) 0 p P = +