Sony TA-VE810G - Manuel (Page 39)

39 GB
Getting Started Front Panel Operations
To Do This
Reinforce the bass Press BASS BOOST to turn
on the BASS BOOST
indicator.
Adjust the balance Turn the BALANCE control
to the left (L) or right (R).
Enjoy high quality sound Press DIRECT PASS to
bypass audio effects the
equalizer, bass
reinforcement, and
surround effects. The
DIRECT PASS indicator
lights up.
z
When you listen with headphones
Connect the headphones to the PHONES jack and set
the SPEAKERS selector to OFF.
z
To listen to decoded Dolby Digital (AC-3)
programme sources
Press 5.1 INPUT. The 5.1 INPUT indicator lights up and
the function automatically switches to LD/DVD. To
listen to analog signals from the component connected
to the LD/DVD jacks, select LD/DVD using the VIDEO
FUNCTION selector.
z
To adjust the brightness of the display
Press DIMMER repeatedly to select the brightness you
desire.
Playing audio and video components at the
same time
1
Press VIDEO FUNCTION repeatedly to select the
video component you want.
2 Press AUDIO FUNCTION repeatedly to select the
audio component you want.
3 Start playing the selected video and audio
components.
Recording
For the on-screen operations, see page 22.
1 Press VIDEO FUNCTION or AUDIO FUNCTION
repeatedly to select the playback component you
want to record.
2
Insert a blank tape into the recording component
and adjust the recording level, if necessary.
3
Start recording on the recording component, then
start playing the playback component.
To stop recording
Stop both components.
Notes
• Sound input through the 5.1 INPUT jacks cannot be
recorded.
• Sound input through the TAPE IN jacks cannot be
recorded.
• When you record on a component connected to the DAT/
MD REC OUT or TAPE REC OUT jacks, sound
adjustments do not effect the recording.